2006 Johnson SD 3.5 HP 2 Stroke Outboard Service Manual, PN 5006562, Page 130Get this manual
If electrical parts are replaced or even removed from the outboard, check the following:
Wire and high voltage lead routing
As shown in service manual Away from moving parts which could cut wires or wire insulation Away from engine cover latches which can catch and cut insulation from high voltage spark plug leads
Sleeves, boots, shields
In position (to avoid shock hazard) Not torn or cracked
Metal ClampsTie Straps
Position as shown in manual
Tighten firmly-these keep
Screws, Nuts, Washers
clamps in position and ends of wires from sparking Where lock washers are called for, use them