2006 Johnson SD 3.5 HP 2 Stroke Outboard Service Manual, PN 5006562, Page 119Get this manual
MANUAL STARTER MANUAL STARTER SERVICING Install pulley into starter housingThe inner spring hook must catch into slot of the pulleyPlace thrust washer on spindleInstall retaining ring with sharp side facing out1
1Inner spring hook 2Slot
Place ratchet on pulleyPlace cover and friction spring on spindle
Place rope in notch and turn pulley three turns counterclockwise from its relaxed positionFeed rope through eyelet on starter housingWhen there is still approximately 12 in(30 cm) of rope outside the starter housing, tie slipknot in the rope to hold in placeInstall motor cover panel onto starter housing