2006 Johnson SD 3.5 HP 2 Stroke Outboard Service Manual, PN 5006562, Page 110Get this manual
GEARCASE DISASSEMBLY Use Puller Bridge, PIN 432127, and Small Puller, PIN 432131, to remove both driveshaft sealsDiscard the sealsented vertically and then extract the forward bearing
22278 22280
To remove upper and lower driveshaft bearings, assemble the components of the Driveshaft Bearing Remover and Installer, PIN 392092, (Guide plate, Small Disc with flat toward bearing, and Rod) within the gearcase housingAttach Slide Hammer, PIN 391008, to the rod and remove both bearings at the same time
To remove the shift rod bushing, use components of the Driveshaft Bearing Remover and Installer, PIN 392092 (Guide Plate and Rod)Thread the top of the rod into the shift rod bushingAttach Slide Hammer, PIN 391008, to the rod and remove the bushingDiscard both the bushing and the O-ring12345Upper driveshaft bearing Lower driveshaft bearing Guide plate Small disc Rod