2004 SR Johnson 4 Stroke 9.9-15HP Outboards Service Manual, Page 95Get this manual
FUEL SYSTEM THROTTLE LINKAGE AND CABLE 5Fully close the throttle control grip(for tiller handle model) Position the control handle into Neutral(for remote control model) 6Secure the throttle cable in the holder (!) by fitting groove on the cable into slot on the holder, then install the bracket to secure the cable7Thread the connector
onto the cable
8Turn the drum counterclockwise until mm clearance exists at "Y 9While pushing cable end as shown by arrowadjust the connector until the center of connector aligns with the center of ball pivot on the drum 10When aligned, press fit the connector onto the ball pivot and tighten the lock nut 11Make sure the lever contacts the stopper with throttle control fully opened