2004 SR Johnson 2-stroke 40, 50HP Service Manual, Page 283Get this manual
MANUAL STARTER ASSEMBLY Make sure the starter pawl bushing is installed in the pulleyApply Triple-Guard grease or Lubriplate 777 to boss of the starter pawlPlace spring washer on the boss of the starter pawlPlace the starter pawl in the pulleyPosition the starter housing spring in the starter housingClean threads of the starter pawl plate retaining screw and nut to remove adhesiveInstall the starter pawl plate retaining screw and washer into the starter housingTighten screw to torque of 120 to 144 in Ibs(14 to 16 Nm)11Lock ring 2Spring washer (under starter pawl) 3Spring Screw