2004 SR Johnson 2-stroke 40, 50HP Service Manual, Page 282Get this manual
MANUAL STARTER ASSEMBLY Remove the crank retainer screw and the crank and pin assembly from the starter winder baseRemove the starter winder base from the vise Bend the inside loop of the rewind spring in toward the center of the starter housingEngage the slot of the pulley with the inner loop of the rewind spring, and install the pulley in the starter housing
Install the rewind spring into the starter housingLocate the outer loop of the rewind spring on the pin in the starter housingPress down through the holes in the spring winder base to transfer the rewind spring into the starter housing1Inside loop Slot