2004 SR Johnson 2-stroke 40, 50HP Service Manual, Page 53Get this manual
INSTALLATION AND PREDELIVERV OILING SYSTEM SET-UP
Remote Oil Fill Kit (Optional)
The Remote Oil Fill Kit, PIN 176461, provides deck-mounted fill tube, cap, tank-mounted tube, and nut that replace the original oil tank cap assemblyInstallation Recommendations: Select location on the deck of the boat that is above the oil tank fill cap Select deck location which allows the required length of 12 in1.0fill hose to route as directly and as vertically as possible Avoid inappropriate hose routings that could distort the fill tube or tank tube Refer to installation instructions provided with remote oil fill kitA slanted area of the deck will allow water to drain away from the fill and is best suited for the installation
Fill the oil tank with the recommended oil
IMPORTANT: Refer to Engine Lubricant on
p51 for recommended oilThe "LOW OIL" light should turn offTurn key switch to OFF and install oil fill cap
Oiling System Priming
40150 PL MODELS