2004 SR Johnson 2-stroke 40, 50HP Service Manual, Page 52Get this manual
INSTALLATION AND PREDELIVERV OILING SYSTEM SET-UP
OILING SYSTEM SET-UP
Engine Lubricant
EvinrudeJohnson XD30 outboard oil is recommended for use in this modelIf XD30 oil is not available, you must use an oil that meets NMMA TC-W3RL certification
Each oil tank is originally fitted with single oil pickup assembly with 15 ft(4.5 m) of oil supply hose and 17 ft(5.2 m) of sending unit wiring har-
Engine Lubricant below 32F (OOe)
If the outboard will be operated in temperatures below freezing (32F, Q0C)Evinrude Biodegradable Outboard Oil MUST be used
IMPORTANT: Failure to follow these recommendations could void the outboard warranty if lubrication-related failure occurs
40150 PL MODELS These models are equipped with oil injection but require 50:1 (2 oil) fueloil ratio during break-inRefer to Break-In (10 Hours) on p5340R, 40RL MODELS
These models are not equipped with oil injection and require 50:1 (2 oil) fueloil ratio during normal operation and 25:1 (4 oil) fueloil ratio during break-inRefer to Break-In (10 Hours) on p.53Fuel