2004 SR Johnson 2-stroke 40, 50HP Service Manual, Page 3Get this manual
SAFETY INFORMATION Before working on any part of the outboard, read the SAFETY section at the end of this manualThis manual is written for qualified, factory-trained technicians who are already familiar with the use of Bombardier Special ToolsThis manual is not substitute for work experienceIt is an organized guide for reference, repair, and maintenance of the outboard(s)This manual uses the following signal words identifying important safety messagesIt is understood that this manual may be translated into other languagesIn the event of any discrepancy, the English version shall prevailTo reduce the risk of personal injury, safety review is provided at the beginning of each sectionDO NOT do any repairs until you have read the instructions and checked the pictures relating to the repairsBe careful, and never rush or guess service procedureHuman error is caused by many factors: carelessness, fatigue, overload, preoccupation, unfamiliarity with the product, and drugs and alcohol use, to name fewDamage to boat and outboard can be fixed in short period of time, but injury or death has lasting effectrequired, use EvinrudeJohnson Genuine Parts or parts with equivalent characteristics, including type, strength and materialUsing substandard parts could result in injury or product malfunctionWhen Torque wrench tightening specifications must be strictly followedReplace any locking fastener (locknut or patch screw) if its locking feature becomes weakDefinite resistance to turning must be felt when reusing locking fastenerIf replacement is specified or required because the locking fastener has become weak, use only authorized EvinrudeJohnson Genuine PartsIf you use procedures or service tools that are not recommended in this manual, YOU ALONE must decide if your actions might injure people or damage the outboardreplacement parts are