2004 SR Johnson 2 Stroke 9.9, 15, 25, 30 HP Outboards Service Manual, Page 284Get this manual
GEARCASE ASSEMBLY9.915
ASSEMBLY9.915
IMPORTANT: Make no dry assembliesLubricate all bearings, shafts, and gears with Ultra-HPF gearcase lubricantOil and place the forward bearing cone and roller assembly in the forward bearing cupTo install the forward gear and the shifter lever and yoke assembly, begin by threading Yoke Locator, PIN 319991through the shift rod bushing and threading it into the shifter yoke Remove the cradle from the yokeThen, while pulling on the yoke locator, guide the assembly into the gearcaseThe forward gear should come to rest against the forward bearing, and the shift lever should be located in the slot at the bottom of the gearcase