2004 SR Johnson 2 Stroke 9.9, 15, 25, 30 HP Outboards Service Manual, Page 276Get this manual
GEARCASE BEARING AND SEAL REMOVAL
Shift Rod Bushing and O-ring
Position Shift Rod Bushing Remover, PIN 327693, under the shift rod bushingThread the adapter of the Slide Hammer, PIN 391008, in the slide hammerPlace the adapter through the shift rod bushing and thread into the remover toolRemove the handle from the remover toolThen remove the bushing from the gearcaseOnce the bushing has been removed from the gearcase, examine the bushing for damageIf damaged, replace the bushing on reassemblyRemove and discard the O-ring(s) and washer from the bushing