2004 SR Johnson 2 Stroke 9.9, 15, 25, 30 HP Outboards Service Manual, Page 275Get this manual
GEARCASE BEARING AND SEAL REMOVAL
Pinion Bearings
Place bearing removal tool in the drives haft cavityUse mallet to drive the two pinion bearings into the propeller shaft cavity of gearcaseDiscard the bearings
Forward Bearing
Using Slide Hammer, PIN 432128, and Bearing Puller, PIN 432130, remove the forward bearing cup from the gearcase
9.915 MODELS
Use Bearing Remover, PIN 319880Slide hammer
Bearing remover
Secure the puller jaws into grooves behind the cupUse Wrench, PIN 334359, to hold the puller while tightening the jaws