2004 SR Johnson 2 Stroke 9.9, 15, 25, 30 HP Outboards Service Manual, Page 246Get this manual
MIDSECTION EXHAUST HOUSING Slide the mount housing bumper into place between the lower front mount and the exhaust housingPosition the port and starboard lower mount housingsClean the threads of the four lower mount housing screws and apply Screw Lock to threads of the screwsInstall the two side lower mount screws, then install the two front screwsTighten all four screws to torque of 144 to 168 inIbs(16 to 19 Nm)Slide the adjusting lever and shaft through the exhaust housing with flat side upAs the adjusting lever and shaft comes through the exhaust housing, install the shift rod leverSnap the shift shaft retainer into placePlace new shift rod lever clip over the shift rod leverInstall and tighten the screw to torque of 60 to 84 in Ibs(7 to Nm)Bend the locking tab of the clip against the head of the screw1