2004 SR Johnson 2 Stroke 9.9, 15, 25, 30 HP Outboards Service Manual, Page 237Get this manual
MIDSECTION STEERING HANDLETILLER MODELS
2530 MODELS
Apply Tripe-Guard grease to the steering handle sleevePlace the sleeve into the steering bracketAttach the steering handle to the steering bracketTighten the screw and nut so the steering handle can pivot and maintain any position
Thread the anchor onto the cable housing in(50 mm), plus or minus one turnfrom the end of the cable sleeveSecure anchor in place with shoulder screw and spacerNext, thread the connector onto the cable end2 in(50 mm)
Secure stop button ground lead to bottom ignition coil mounting screwTighten screw to torque of 48 to 96 inIbs(5.4 to 10.8 Nm)