2004 SR Johnson 2 Stroke 9.9, 15, 25, 30 HP Outboards Service Manual, Page 217Get this manual
POWERHEAD INSTALLATION2530 ALL MODELS Connect the overboard water indicator hose to the fitting on the exhaust coverSecure the hose in the J-clamp
Slide the throttle control rod through the nylon block on the throttle control leverInsert the pin in the end of the rodThe offset on the nylon block must face forwardPlace the nylon bushing on the stud of the throttle control leverEngage the armature plate link on the stud Place the washer over the stud and engage the spring
Connect the fuel hose to the fuel pump with new tie strap
1Throttle control rod Pin 3Armature plate link 4Spring