2004 SR Johnson 2 Stroke 9.9, 15, 25, 30 HP Outboards Service Manual, Page 133Get this manual
IGNITION IGNITION PLATE SERVICING Lubricate the ignition plate bearing groove with Moly Lube
2530 MODELS
Place the retainer plate, washers, and pilot ring on the powerheadBe sure washers are placed between the pilot ring and powerheadAlign pilot ring with four screw holes in powerheadApply Nut Lock to threads of the four pilot ring screwsInstall the screws and torque to 48 to 60 inIbs(5 to Nm)
1Groove
Apply Nut Lock to the threads of the ignition plate screwsInsert needle-nose pliers into slots in the ignition plate bearing and compress bearing while guiding the ignition plate into position1Screws