2004 SR Johnson 2 Stroke 9.9, 15, 25, 30 HP Outboards Service Manual, Page 41Get this manual
INSTALLATION AND PREDELIVERY REMOTE CONTROLS IMPORTANT: Use marine sealant rated for above or below waterline useRTV silicone is not approved for below waterline usePolyurethane sealants are not easily removed and may damage outboard or boat mounting surfaces when removed REMOTE CONTROLS
Remote Control Selection
WARNING
The remote control used must have the start-in-gear prevention featureThis feature can prevent injuries resulting from unexpected boat movement when the outboard startsRemote control styles and applications are described in the EvinrudeJohnson Genuine Parts and Accessories CatalogPlan the installation of all remote controls carefullyRead the outboard's Operator's Guide and the remote control's installation instructions prior to installationTYPICAL 1Clamp screws 2Transom plate 3Stern bracket holes
Apply marine sealant generously behind the heads and to the shanks of the mounting bolts before inserting them, and to the surfaces of washers that contact the transomSecure the outboard to the boat's transom using the mounting hardware provided