2003 Johnson ST 6/8 HP 4 Stroke Outboards Service Manual, PN 5005471, Page 238Get this manual
If electrical parts are replaced or even removed from the motor, check the following:
Wire and high voltage lead routing
As shown in service manual Away from moving parts which could cut wires or wire insulation Away from motor cover latches which can catch and cut insulation from high voltage spark plug leads
Sleeves, boots, shields
In position (to avoid shock hazard) Not torn or cracked
Metal ClampsTie Straps
Position as shown in manuals
Screws, Nuts, Washers
Tighten firmlyThese keep clamps in position and ends of wires from sparking Where lock washers are called for, use them