2003 Johnson ST 6/8 HP 4 Stroke Outboards Service Manual, PN 5005471, Page 196Get this manual
MIDSECTION MIDSECTION ADJUSTMENTS Install the PowerheadRefer to POWERHEAD sectionInstall the GearcaseRefer to GEARCASE section
Steering Friction Adjustment
Adjust steering friction with motor mounted to boat by loosening or tightening screw with screwdriverSteering friction should be adjusted so that slight drag is felt when turningMinimum friction is required when remote steering is used
MIDSECTION ADJUSTMENTS
Tilt Friction Adjustment
Use 916 inwrench to tighten the tilt shaft nut only enough to control the return of the gearcase from TILT to RUN position&
WARNING
Do not overtightenThe steering friction screw is not intended to allow "hands off" steering1