2003 Johnson ST 6/8 HP 4 Stroke Outboards Service Manual, PN 5005471, Page 165Get this manual

2003 Johnson ST 6/8 HP 4 Stroke Outboards Service Manual, PN 5005471, Page 165

POWERHEAD ASSEMBLYHP If removed, install new crankshaft sleeve with a-ring on end of crankshaft using Crankshaft Sleeve Installer, PIN 342662, until seated Apply Moly Lube to the a-ringLubricate connecting rod and rod cap surfaces with oilInstall caps using new retainers and rod screwsTorque in stages to 96 to 108 inIbs(11 to 12 Nm)Bend retainer tabs up to hex heads
Lubricate new bearing halves with oil and install in cylinder block with bearing edge flush with block
IMPORTANT: DO NOT overtighten screws or

Back to 2003 Johnson ST 6/8 HP 4 Stroke Outboards Service Manual, PN 5005471