2003 Johnson ST 6/8 HP 4 Stroke Outboards Service Manual, PN 5005471, Page 139Get this manual

2003 Johnson ST 6/8 HP 4 Stroke Outboards Service Manual, PN 5005471, Page 139

POWERHEAD DISASSEMBLYHP Remove four screws retaining the cylinder head coverRemove cover and O-ring sealDiscard sealRemove and discard O-rings from dowel pins in cylinder blockRemove and replace dowel pins, if necessary

1Screws

1Dowel pins

IMPORTANT: Cylinder head screws are different lengthsMake note to ensure correct installation during reassemblyRemove six screws retaining cylinder head to cylinder blockTap on the head with plastic or leather malletRemove head and discard gasket

Back to 2003 Johnson ST 6/8 HP 4 Stroke Outboards Service Manual, PN 5005471