2003 Johnson ST 55 HP WRL 2 Stroke Commercial Service Manual, PN 5005483, Page 165Get this manual
MIDSECTION STERN BRACKET Install the wave washer and the bellcrank on the tiltrun shaftTighten the setscrewPosition the tang on the port washer toward rear of the stern bracketInstall the nut loosely on the tilt shaft bolt
1Belcrank setscrew
Tang washer
C0A2985
Install the starboard stop link on the swivel bracketInstall and tighten the screw and the nut to torque of 144 to 168 inIbs(16 to 19 Nm)
Apply Nut Lock to threads of the two flange screwsInstall the two screws through the starboard stern bracket flange into the port stern bracket flangeTighten the screws to torque of 144 to 168 inIbs(14 to 16 Nm)Tighten the nut on the tilt shaft bolt to torque of 14 to 16 ftIbs(19 to 22 Nm)