2003 Johnson ST 55 HP WRL 2 Stroke Commercial Service Manual, PN 5005483, Page 98Get this manual
MANUAL STARTER
INSTALLATION
Check operation of the starter pawl when the starter rope is pulled outThe starter pawl should extend when the starter rope is pulled and retract when the starter rope recoilsInstall the starter lockout lever, lockout lever springs (lower tang of upper spring resting on casting), and thick washer to the starter housingPlace the thin washer under head of the screw and tighten securelyInstall pulley support and screwApply Nut Lock to threads and torque 60 to 84 inIbs(7 to Nm)Tighten the two starter handle bracket screws to torque of 60 to 84 inIbs(7 to Nm)
_-41Stop button retaining nut 2Starter handle bracket screws
Place stop button through hole in handle bracket and secure with nutApply Triple-Guard grease or Lubriplate 777 to the starter lockout slide area of the starter housingPlace the starter lockout slide in the channel of the starter housing Loosely secure the starter lockout cable to the starter housing with cable clamp and screwShift the outboard to NEUTRALAdjust starter lockout cable so starter lockout slide is centered on the lockout leverTighten the cable clamp screw securely12345Starter lockout lever Springs Washer Starter lockout lever screw Pulley support with screw