2003 Johnson ST 55 HP WRL 2 Stroke Commercial Service Manual, PN 5005483, Page 95Get this manual
MANUAL STARTER
ASSEMBLY
Using Starter Spring Winder and Installer, PIN 392093, clamp spring winder base in viseInsert release plate into spring winder baseRemove the crank retainer screw and the crank and pin assembly from the starter winder baseRemove the starter winder base from the viseBase
Apply Triple-Guard grease or Lubriplate 777 to the rewind springInstall the rewind spring into the spring winder base with open loop of spring facing inwardInsert the pin of the crank and pin assembly into the loop of the rewind spring Secure the crank and pin assembly to the starter winder base with the crank retainer screw
Install the rewind spring into the starter housingLocate the outer loop of the rewind spring on the pin in the starter housingPress down through the holes in the spring winder base to transfer the rewind spring into the starter housing2