2002/2003 Johnson SN/ST 2 Stroke 3.5, 6 8 HP Outboards Service Manual, PN 5005466, Page 197Get this manual
GEARCASE DISASSEMBLY3.5 To remove upper and lower driveshaft bearings, assemble the components of the Driveshaft Bearing Remover and Installer, PIN 392092, (Guide plate, Small Disc with flat toward bearing, and Rod) within the gearcase housingAttach Slide Hammer, PIN 391008, to the rod and remove both bearings at the same timeTo remove the shift rod bushing, use components of the Driveshaft Bearing Remover and Installer, PIN 392092 (Guide Plate and Rod)Thread the top of the rod into the shift rod bushingAttach Slide hammer, PIN 391008, to the rod and remove the bushingDiscard both the bushing and the 0ring