2002/2003 Johnson SN/ST 2 Stroke 3.5, 6 8 HP Outboards Service Manual, PN 5005466, Page 97Get this manual
IGNITION COMPONENT SERVICING68 Loosen the ignition plate screwsLift the ignition plate from the powerheadInstall plate on bottom of the ignition plateScrew (5)
Install the wireclamp on ignition plateRemove the plate from the bottom of the ignition plate
Remove the leads from the spiral wrap and from the ignition component
Apply Nut Lock to the threads of the ignition plate screwsInstall the ignition plate on the retainer plateTorque screws 25 to 35 in Ibs(2 .8 to 4.0 Nm)Check for sufficient slack on ignition component leadsRoute component leads through wire clampsPosition Locating Ring, PIN 334994, over machined bosses on the ignition platePush the locating ring in toward the component to be installedHold the ring in place and pull the component out toward the ringTighten screws to 15