2000 Johnson/Evinrude SS 25, 35 3-Cylinder outboards Service Manual, Page 209Get this manual
11 10Remove nut and pulley retainer from mandrel and remove starter assembly
11Install spindle, screw and locknutTighten locknut to 120-144 inIbs(14-16 Nm)
[] 12Install pawl, linkage, and retaining ring (sharp edge up)[] 13Reinstall lockout cam, tappet, spring, and plunger in housingInstallation
1Position starter on motorConnect starter lockout link to
cam 2Reinstall starter screwsTighten screws to 60-84 inIbs(7-9 Nm)