2000 Johnson/Evinrude SS 25, 35 3-Cylinder outboards Service Manual, Page 207Get this manual
Disassembly]1To service lockout assembly, remove the retaining pin []J
2Remove the plunger, spring, tappet, and cam from the housingWear safety glasses while disassembling and assembling manual starters because of rewind spring tension&
[] 3Pull rope out completely and retain pulley in position with stop tool (Kit, PIN 34268214Remove rope from pulley channel, untie knot and remove rope from starter assembly5Remove stop tool and slowly unwind pulley until tension is released[] 6Remove retaining ring, pawl, and linkage::
7Remove the starter spindle screw and locknutHold the pulley down in housing and lift out spindleCarefully lift out pulley, leaving spring in housingDo not remove spring with housing facing upDo not lift spring out of housing by hand or with pliersSpring is under tension and will cause injury if accidentally released