2000 Johnson/Evinrude SS 25, 35 3-Cylinder outboards Service Manual, Page 170Get this manual
9Remove the two upper motor mount screws (one on each side of the housing)Remove the exhaust housing from the swivel bracketW
10Remove the upper and lower motor mounts by prying them out of the pockets in the exhaust housing with screwdriver
rn 11.them off the roll pinscover mounts by twisting and Remove the lower motor pulling
12Remove the upper and lower motor cover seals by pulling them out of their grooves and off the exhaust housing 13Refer to Cleaning and Inspection at the beginning of this section