2000 Johnson/Evinrude SS 25, 35 3-Cylinder outboards Service Manual, Page 167Get this manual
6Install the throttle control plate on outer handle
7Place the throttle end cap into inner handleThe tab on the cap goes into the recess of the inner handle
rn 8Push the throttle cable pin through the end of the throttle cableI1Q]
9Lubricate end ofthe pin, guides, rollers, helix grooves, and inner handle guide slot with OM: Moly LubePlace the guides over the roller pin and into the slots of the inner handlePlace the rollers on the ends of the roller pin
OAssemble the helix halves on the handle and slide the grip over the helixBe sure the twist-grip's speed indicator line is positioned with the speed range symbol on the handleSnap the grip into place