2000 Johnson/Evinrude SS 25, 35 3-Cylinder outboards Service Manual, Page 145Get this manual
7Connect the low oil light lead to the engine harnessSecure the connector to the ignition module
rn 8Install the starboard lower motor coverrn 9Attach the steering arm toscrews to 216-240 inIbs(24-27 the tiller armSecure with two screws and washersTighten the
Nm)Thread two locknuts onto the threaded ends to the two tiller arm screws and tighten to 216-240 inIbs(24-27 Nm)
rn 10Place the shift and inelectricalin cables in the lower motor cover grommet and secure place the lower motor coverrn 11.and allow to air dryApply ONIC the two trunnion anchor Apply ONIC Locquic Primer to Nut Lock adhesive to the screws