2000 Johnson/Evinrude SS 25, 35 3-Cylinder outboards Service Manual, Page 125Get this manual
Powerhead Servicing RemovalTiller Models
To avoid accidental starting of engine, twist and remove all spark plug leads before beginning service
Because ofthe number and types of fasteners (screws and nuts), it might be appropriate to reinstall fasteners in their holes as engine components are removedThis will simplify identification and assembly1Turn the retainer knob located in the middle of the air silencer and remove the silencer from the engineDisconnect the drain hose from the nipple at the bottom of the silencer
rn securing the choke cable topin from the retainerRemove 2Remove the choke cable clip the bracketW 3Remove the cable from the bracketW 4Unscrew six lower motor cover retaining screws []]5Remove the port side lower motor cover enough to cut