2000 Johnson/Evinrude SS 25, 35 3-Cylinder outboards Service Manual, Page 114Get this manual
STEPPOWER COIL TEST Ground Test 1Disconnect 4-pin Packard connector between stator and ignition module2Set peak-reading voltmeter to
rn 3Connect the meter black lead to astator leadsCrank engine and observe meter red each clean engine groundAlternately connect meter lead between the orange and orangeblack at
connection: Any reading indicates power coil is grounded Locate and repair ground, or replace stator assembly4If no reading is indicated in Step 3, go to Output TestOutput Test 1Set peak-reading voltmeter to