2000 Johnson/Evinrude SS 25, 35 3-Cylinder outboards Service Manual, Page 103Get this manual
1111111' '-"" 42201
Amphenol Connector Servicing
INote The Amphenopin and socket terminals are not the same
size as Deutsch pin and socket terminalsYou cannot interchange themTerminal Removal
1To remove terminal from the plug or receptacle, lubricate both ends of the cavity with isopropyl alcohol
rn Pick the proper tool for the service being performed:
OMC OMC OMC OMC
Pin Remover, PI 322698 Socket Remover, PI 322699 Crimping Pliers, PIN 322696 Insert Tool, PI 322697
W [I] 2Place the plug or receptacle against the edge of flat
surface with clearance behind connector for terminal to be pushed outPush terminal from connector with tool or
3Pin and socket terminals may be replaced if damagedStrip in(6 mm) insulation from wire and crimp new terminal onto wire at point with crimping pliersTerminal Installation