2000 Johnson/Evinrude SS 25, 35 3-Cylinder outboards Service Manual, Page 75Get this manual

2000 Johnson/Evinrude SS 25, 35 3-Cylinder outboards Service Manual, Page 75


4Remove the fuel outlet clamp from the fuel filterRemove the outlet hose from the filterCatch any fuel that might leak from the filter
5Remove the screw securing the lower oil tank and mixing unit brackets to the powerheadPull the brackets away from the powerhead slightly
rn &.unit.Cut the tiethe hose securing the fuel unit nippleCatch 6strap outlet hose to the mixing Remove from the mixing
any fuel that might leak outMixing Unit Disassembly

1Separate the oil tank from the mixing unit by cutting the tie strap Pull the hose off the oil tank nipplePlug the nipple to prevent loss of oil2Cut the tie strap and remove the short fuel hose from the inlet nippleW