2000 Johnson/Evinrude SS 25, 35 3-Cylinder outboards Service Manual, Page 60Get this manual
m ohms scalethe solenoid windings, the purplewhite and black 5To test calibrate an ohmmeter on low and connect between leads Meter should indicate 5.5 1.5 ohms6To test solenoid valve and seat: []] []] []] Lightly pressurize inlet fitting with alcohol and syringe With lever in run positionno fluid should enter inlet fitting With lever in prime positionfluid should come out both outlet fittings
7To inspect or replace internal components, remove the four solenoid cover screws
rn 8When assembling solenoid, tighten securely.in their holes back out screws to engage original threadsthen,