2000 Johnson/Evinrude SS 25, 35 3-Cylinder outboards Service Manual, Page 44Get this manual
Rigging Information Remote Control
To prevent accidental starting of engine, verify that battery cables are disconnected at batteryControl Cable Identification
1Put the control handle into NEUTRAL position The throttle cable casing guide will retract completely and the shift cable casing guide will go to the midpoint of its travel2As you move the control handle into FORWARD, the shift cable casing guide must retract and the throttle cable casing guide must begin to extend3As you move the control handle into REVERSEboth casing guides must extend4Identify each control cable for proper installation
Control cable identification and function must be correct before continuing with installationShift Cable 1Extend shift cable and lubricate with CIVIC Triple-Guard grease2Verify that the fast idle lever is down in the RUN position3Move the remote control handle to NEUTRAL