2000 Johnson/Evinrude SS 2 thru 8 outboards Service Manual, Page 211Get this manual
r:m 5.handle guide slotthe pin, guides, roller, helix grooves, and Lubricate end of inner with Moly LubePlace the guides IllI 6[11]
QVIC over the roller pin and place the pin into slots of the inner handle Place the rollers on ends of the roller pin
Assemble the helix halves on the handle, place idle adjustment knob in end of handle, and slide the grip over the helixBe sure the speed indicator is positioned with the speed range and not 1800 outSnap the grip into place7Be sure handle screw retainer is in proper position and place cover on handle
Installation
1Insert the stop button wires and the throttle cable through the grommet in the lower engine cover2Attach the steering handle to the steering bracket3Secure the stop button ground lead to the powerhead4Install blackyellow wire into plug