2000 Johnson/Evinrude SS 2 thru 8 outboards Service Manual, Page 177Get this manual
Assembly INotel Proceed slowlyMake no forced assemblies unless a
pressing operation is called for All internal components must be perfectly clean and lightly coated with Johnson or Evinrude Outboard Lubricant1Note
I Use new gaskets, seals, and O-rings during assembly
1If removed, install wrist pin bearing using OMC Bearing Installer and Remover, PI 327645
221 Note When installing wrist pin bearing, the oil hole must
align with the hole in rod end
12311241