2000 Johnson/Evinrude SS 2 thru 8 outboards Service Manual, Page 163Get this manual
Disassembly Note To simplify reassembly and wiring installation, layout the
various screws and clamps in the order of their proper location1Remove carburetor, leaf valve assembly, and intake manifoldDiscard gaskets2 Remove the cylinder head and gasketDiscard the gasket3With an indelible ink marker, mark the top piston dome, "No1", and the bottom piston dome, "No2" 4Remove exhaust coverDiscard gasket
5Remove the lower crankcase head6Remove seal and remove snap ring from crankcase
W 7Using tool as drawn on Page 4-8, or equivalent, push the