2000 Johnson/Evinrude SS 2 thru 8 outboards Service Manual, Page 99Get this manual
7From OMC Universal Puller Set, PI 378103, assemble the following components:
Body, PI 307636 Pressing Screw, PI Handle, PIN 307638
Screws (3), PI 307641thru Screws (3), PIN 1153082, 2.3, 3.3 Washers (3), PI 307639thru Washers (3), PIN 3076462, 2.3, 3.3
[] 8Install the puller on flywheel with body flat side upSeat the shoulder screws completelyHold puller with its handle and tighten pressing screw until flywheel releases9Remove the flywheel
Installation
1Install the flywheel key as follows:
[[] 2,2.3,3.3,5Install the flywheel key
parallel to centerline of crankshaft
its outer edge