2000 Johnson/Evinrude SS 2 thru 8 outboards Service Manual, Page 69Get this manual

2000 Johnson/Evinrude SS 2 thru 8 outboards Service Manual, Page 69

7Install valve seat8Place float valve

into valve seat, and install float hinge and main jet with spring on
DRC3548

[;]] 9Install needle jet

[;]] 10Install slow speed adjustment screw carburetor body11Install new float chamber gasket

12Check for correct positioning of float hingeFloat level controls the height of fuel in the float chamber and is critical to carburetor calibration and functionTop of float hinge should be 0.090 in(2,3 mm), measured from the top of the gasket
[;]] 13Install float