1999 Evinrude "EE" Electric Outboards Service Manual, P/N 787021, Page 185Get this manual

1999 Evinrude "EE" Electric Outboards Service Manual, P/N 787021, Page 185

Reassembly

Reassemble in the reverse order of disassembly, with special attention to these steps
1Use OMC Thread Tap Kit, PIN 5000006, to clean threads of housingPull wires through tap, turn until fully seated and remove
2Position motor tube in holder and tighten securely in viseApply OMC Locquic Primer to threads, let dry, apply Loctite 277 and install motor housing so that the holes on top of motor tube are parallel to propeller shaft

Back to 1999 Evinrude "EE" Electric Outboards Service Manual, P/N 787021