1999 Evinrude "EE" Electric Outboards Service Manual, P/N 787021, Page 140Get this manual

1999 Evinrude "EE" Electric Outboards Service Manual, P/N 787021, Page 140

Speed Control Switch ServiceExcept HBF2 Removal

1Push plastic shaft back from the switch with flat blade screwdriver
rn 2Loosen the nut retaining the speed control switch[] 3Remove the switch from the mounting bracket and unsolder wires[] 4If required, the speed control wheel can be removed by pushing the plastic shaft out of the wheel and pedalInstallation

[] 1Attach the switch wires using the diagram at the end of this section for correct wire routing and locations2Use only rosin core solderDo not use acid core solder

Back to 1999 Evinrude "EE" Electric Outboards Service Manual, P/N 787021