1999 Evinrude "EE" Electric Outboards Service Manual, P/N 787021, Page 139Get this manual
ONOFF Switch ServiceAll Models Removal
1Remove screw retaining the switch and bracket
2Unsolder and remove two RED wires from the switch (two BROWN wires, P.W.Mmodel)
[] 3Remove rubber boot from the switch
4Remove nut retaining the switch to the bracketSave fiber washer and O-ringInstallation
[] 1Reinstall fiber washer and O-ring on the new switch
2Place bracket on the switch3Install the nut and tighten securely
[] 4Install the rubber boot
m 5Solderwiring(or at the endtoof this sectionwires wires the switchRoute as shown on diagram