1999 Evinrude "EE" Electric Outboards Service Manual, P/N 787021, Page 132Get this manual
Motor-to-Guide Adjustment
1Raise motor until it contacts the motor rest guide In this position the distance between the contact point and the motor parting line must be:
12-Voltt, 1224-Volt, 24-Volt P.W.M12-Volt HT1224-Volt HT, 24-Volt HT P.W.M
Dimension
7 8-1 in(22-9 mm)
1-1112 in(32-38 mm) 15fs- F8 in(41-48 mm)
PCEx076
HTHigh-Thrust (Models with "2T" or "4T" in number Except HBF2
2The motors may be identified by their skeg shape, as shown: All High-Thrust motors have curved trailing edge on the skeg 12-Volt High-Thrust motors have long pointed skeg 1224-Volt and 24-Volt High-Thrust motors have long skeg with the point cut off Standard-Thrust motors have skegs shaped as shown in andthe narrower skeg being on the HBF2 model