1999 Evinrude "EE" Electric Outboards Service Manual, P/N 787021, Page 120Get this manual
Disassembly
rn rn rn rn rn rn
1Remove two motor thru -bolts Discard thru-bolt a-rings 2Remove drive-end end cap from motorDiscard end cap -ring
3If the bearing in the drive-end end cap is worn or damaged, replace the assemblyIf seals are worn or damaged, remove seals and spacerSave spacer4Remove fiber thrust washer
from armature shaft
5Remove motor field assembly by lifting field up while holding armature down (to keep brushes and springs in place)