1999 Evinrude "EE" Electric Outboards Service Manual, P/N 787021, Page 98Get this manual
Installation 1Clean the threaded area of the motor tube using OMC Cleaning Solvent[!]
2Standard ModelsInstall motor tube seal Apply RTV adhesive sealant to top of seal
into adapter
3Spray OMC All-Purpose Marine Cleaner on the motor tube wires to provide lubrication
4Pull the motor tube wires through the motor tube5Temporarily attach motor to adapter[] 6Apply OMC Ultra Lock to the threads of the motor tube7Tighten adapter on motor tube
8Align adapter set screw hole with existing dent in motor tube to set approximate motor alignment9Set motor offset using the Motor OffsetAll Models procedure in this section