1999 Evinrude "EE" Electric Outboards Service Manual, P/N 787021, Page 87Get this manual
6Turn motor straight ahead, and place cover on steering housing with direction indicator pointing straight ahead7Tighten cover screws to 7-10 inIbs(0,8-1,1 Nm)
8Install steering cable clamp and battery cable clamp in pedal baseThread pivot block onto the steering cable until it is centered on the cable threadsTemporarily insert the pivot block pin
Steering Cable AdjustmentHBF2
1Push toe end of pedal down all the way Note how far the motor steers to the right (how much more than 180)Push heel end of pedal downNote how far motor turns to the left