1999 Evinrude "EE" Electric Outboards Service Manual, P/N 787021, Page 79Get this manual
10Remove steering housing set screws only if the housing is to be removed from the mounting tube, or if the bearing cup is to be removed
[] 11Inspect bearing and cup Remove cup and steering housing by tapping the steering housing off of the mounting tube12Tap lower bearing cup off of mounting tube if cup is to be replaced Assembly
[] 1Push steering housing onto top of mounting tube, aligning holes and set screw marksTap bearing cup into mounting tube with holes alignedInstall steering housing screwsTighten to 8-11 in.lbs(0,9-1,2 Nm)